Service Repair Manual | |
Year | 1996-1997 |
Engine code | AR67601 |
Engine size | 1598ccm |
Power | 88kw |
Idle speed | 790-890rpm |
Compression | 11.0-14.0bar |
Fuel system | Bosch Motronic M2.10.3 / M2.10.4 |
Firing order | 1-3-4-2 |
Spark plug | NGK BKR6EKPA+ / PMR7A Denso PK20PR-P8 / IU22 |
Electrode gap | 0.9mm |
CO | 0.5% |
CO2 | 14.5-16.0% |
HC | 100ppm |
O2 | 0.1-0.5% |
CO content at increased idle speed | 0.3% |
Increased idle speed for CO test | 2500-2900rpm |
Lambda | 0.97-1.03 |
Radiator cap | 0.9-1.1bar |
Thermostat opens | 81-85℃ |
Ventilator turn on | 92-97℃ |
Battery | 45Ah |
Alternator | 75A |
Cylinder head tightening sequence | |
Cylinder head tightening torque 1 | 20Nm |
Cylinder head tightening torque 2 | 40° |
Cylinder head tightening torque 3 | 90° |
Cylinder head tightening torque 4 | 90° |
Cylinder head tightening torque 5 | 90° |
Spark plug Tightening torque | M14: 25-35Nm M10: 10-12Nm |
Engine oil with filter | 4.4l |
Cooling system | 8.3l |
Gearbox oil | 2.0l |
Engine oil grade | API SH SAE 10W-40 |
API SH SAE 10W-60 | |
Gearbox oil grade | API GL-5 SAE 80W-90 |
Brake fluid | DOT 4 |
Timing belt | 120000km |
Tire dimension (x/y R z) | 185/60 R14 |
195/60 R14 | |
Front wheel presure | 2.2bar |
Rear wheel presure | 2.0bar |
Wheel bolt tightening torque (B) | 83-103Nm |
Rear hub tightening torque (H) | 226-294Nm |
Minimal front brake disk thickness (R) | 18.2 / 20.2mm |
Minimal rear brake disk thickness (R) | 9.2mm |
Minimal front pad thickness without backing plate (P2) | 1.5mm |
Minimal rear pad thickness without backing plate (P2) | 1.5mm |