Service Repair Manual | |
Year | 1986-1992 |
Engine code | M30B35M |
Engine size | 3430ccm |
Power | 155kw |
Idle speed | 750-850rpm |
Compression | 10.0-11.0bar |
Fuel system | Bosch Motronic M1.3 |
Firing order | 1-5-3-6-2-4 |
Spark plug | Bosch W8LCR Denso J16CR-U NGK ZGR5A |
Electrode gap | 0.7-0.8mm |
CO Catalyst | 0.5% |
CO2 | 14.5-16.0% |
HC | 100ppm |
O2 | 0.1-0.5% |
CO content at increased idle speed | 0.3% |
Increased idle speed for CO test | 2500-3000rpm |
Lambda | 0.97-1.03 |
Radiator cap | 1.3-1.5bar |
Thermostat opens | 80℃ |
Ventilator turn on | 78-86℃ |
Battery | 85Ah |
Alternator | 90A |
Cylinder head tightening sequence | |
Cylinder head tightening torque 1 | 60Nm |
Cylinder head tightening torque 2 | wait: 20min. |
Cylinder head tightening torque 3 | 80° |
Cylinder head tightening torque 4 | run engine for: 25min. |
Cylinder head tightening torque 5 | 35° |
Spark plug Tightening torque | 30Nm |
Engine oil with filter | 5.75l |
Cooling system | 12.0l |
Gearbox oil | 1.6l |
Automatic transmission fluid | 3.0l |
Differential | 1.9l |
Engine oil grade | ACEA A2-96 SAE 10W-30 |
ACEA A2-96 SAE 10W-40 | |
ACEA A2-96 SAE 15W-40 | |
Gearbox oil grade | Orange label = ATF Dexron II D Green label = Synthetic Mobil SCH630(BM) part No. 81-22-9-407-305 Yellow label = MTF-LT-1 / MTF-LT-2 No label = API GL-4 SAE 80 |
Automatic transmission fluid type | ATF Dexron II |
Brake fluid | DOT 4 |
Tire dimension (x/y R z) | 205/65 R15 |
225/60 R15 | |
240/45 R15 | |
Front wheel presure | 2.3bar |
Rear wheel presure | 2.7bar |
Wheel bolt tightening torque (B) | 90-110Nm |
Front hub tightening torque (H) | 290Nm |
Rear hub tightening torque (H) | 248Nm |
Minimal front brake disk thickness (R) | 20.4 / 26.4mm |
Minimal rear brake disk thickness (R) | 10.4 / 8.4mm |
Minimal front pad thickness (P) | 3.0mm |
Minimal rear pad thickness (P) | 3.0mm |