Service Repair Manual | |
Year | 2000-2007 |
Engine code | S54B32 |
Engine size | 3246ccm |
Power | 252kw |
Idle speed | 770-970rpm |
Compression | 11.0-12.0bar |
Firing order | 1-5-3-6-2-4 |
Spark plug | Bosch YR 6 LDE NGK DCPR8EKP Denso IXU24 |
Electrode gap | (Bosch)0.8, (NGK)0.9, (Denso)0.9mm |
Lambda | 0.97-1.03 |
Radiator cap | 2.0bar |
Thermostat opens | 80℃ |
Battery | 70Ah |
Alternator | 115/120A |
Cylinder head tightening sequence | |
Cylinder head tightening torque 1 | 30Nm |
Cylinder head tightening torque 2 | 90° |
Cylinder head tightening torque 3 | 90° |
Spark plug Tightening torque | 28-30Nm |
Engine oil with filter | 5.5l |
Cooling system | 10.0l |
Gearbox oil | 1.7l |
Differential | 1.2l |
Engine oil grade | BMW Longlife SAE 0W-30 |
BMW Longlife SAE 0W-40 | |
BMW Longlife SAE 0W-50 | |
BMW Longlife SAE 5W-30 | |
BMW Longlife SAE 5W-40 | |
BMW Longlife SAE 5W-50 | |
Gearbox oil grade | Orange label = ATF Dexron II D Green label = Synthetic Mobil SCH630(BM) part No. 81-22-9-407-305 Yellow label = MTF-LT-1 / MTF-LT-2 No label = API GL-4 SAE 80 |
Differential oil | API GL-5 SAE 75W-140 |
Brake fluid | DOT4 |
Tire dimension (x/y R z) | front: 225/40 ZR19 |
rear: 255/35 ZR19 | |
225/45 R17 | |
Wheel bolt tightening torque (B) | 110-130Nm |
Front hub tightening torque (H) | 290Nm |
Rear hub tightening torque (H) | M22 = 200Nm M24 = 250Nm M27 = 300Nm |
Minimal front brake disk thickness (R) | 26.4mm |
Minimal rear brake disk thickness (R) | 18.4mm |
Minimal front pad thickness (P) | 3.0mm |
Minimal rear pad thickness (P) | 3.0mm |