Service Repair Manual | |
Year | 2005- |
Engine code | K7M-710 |
Engine size | 1598ccm |
Power | 64kw |
Idle speed | 712-792rpm |
Fuel system | Siemens EMS 31.32 |
Firing order | 1-3-4-2 |
Spark plug | Champion RC87YCL EYQUEM RFN58LZ NGK BRK6ESZ-10 |
Electrode gap | 0.9-1.1mm |
CO | 0.5% |
CO2 | 14.5% |
HC | 100ppm |
CO content at increased idle speed | 0.3% |
Increased idle speed for CO test | 2000rpm |
Lambda | 0.97-1.03 |
Radiator cap | 1.4bar |
Thermostat opens | 89℃ |
Battery | 40-70Ah |
Alternator | Mitsubishi = 70A VALEO SG7 = 75A Bosch = 100A Mitsubishi = 110A |
Cylinder head tightening sequence | |
Cylinder head tightening torque 1 | 20Nm |
Cylinder head tightening torque 2 | 20Nm |
Cylinder head tightening torque 3 | 220 +/-10° |
Spark plug Tightening torque | 25-30Nm |
Engine oil with filter | 3.3l |
Cooling system | 4.5l / AC=5.5l |
Gearbox oil | 3.1l |
Engine oil grade | SAE 0W-30 |
SAE 0W-40 | |
SAE 5W-40 | |
SAE 5W-50 | |
SAE 10W-40 | |
SAE 10W-50 | |
Gearbox oil grade | SAE 75W-80 |
Brake fluid | DOT4 |
Timing belt | 120000km |
Tire dimension (x/y R z) | 165/80 R14 |
185/65 R15 | |
185/60 R15 | |
Front wheel presure | 2.0bar |
Rear wheel presure | 2.0 / 2.2bar |
Wheel bolt tightening torque (B) | 105Nm |
Front hub tightening torque (H) | 280Nm |
Rear hub tightening torque (H) | 175Nm |
Minimal front brake disk thickness (R) | 10.6mm |
Minimal front pad thickness (P) | 6.0mm |
Rear drum diameter (D) | 180.25 / 203.3mm |