Service Repair Manual |
Year | 1995-1998 |
|
Engine code | 182A3.000 |
|
Engine size | 1370ccm |
|
Power | 59kw |
|
Idle speed | 800-900rpm |
|
Compression | 9.85bar |
|
Fuel system | Bosch Monotronic |
|
Firing order | 1-3-4-2 |
|
Electrode gap | 0.8mm |
|
CO | 0.35% |
|
CO2 | 13% |
|
HC | 90ppm |
|
O2 | 0.1-0.5% |
|
CO content at increased idle speed | 0.3% |
|
Increased idle speed for CO test | 2500-2800rpm |
|
Lambda | 0.97-1.03 |
|
Radiator cap | 0.98bar |
|
Thermostat opens | 81-85℃ |
|
Ventilator turn on | 87-92℃ |
|
Battery | 40Ah |
|
Alternator | 65 / 85A |
|
Cylinder head tightening torque 1 | 40Nm |
|
Cylinder head tightening torque 2 | 90° |
|
Cylinder head tightening torque 3 | 90° |
|
Spark plug Tightening torque | 25Nm |
|
Engine oil with filter | 4.1l |
|
Cooling system | 6.0l |
|
Gearbox oil |
1.7 / 2.0l |
|
Engine oil grade | CCMC G5 SAE 5W-50 |
| CCMC G5 SAE 10W-40 |
| CCMC G5 SAE 10W-50 |
|
Gearbox oil grade | API GL-5 SAE 75W-90 |
|
Brake fluid | DOT 4 |
|
Timing belt | 120000km |
|
|
Tire dimension (x/y R z) | 175/65 R14 |
|
Front wheel presure | 2.2bar |
|
Rear wheel presure | 2.2bar |
|
Wheel bolt tightening torque (B) | 90Nm |
|
Rear hub tightening torque (H) | 280Nm |
|
|
Minimal front brake disk thickness (R) | 10.2mm |
|
Minimal front pad thickness without backing plate (P2) | 1.5mm |
|