Service Repair Manual |
| Year | 1995-1998 |
|
| Engine code | 160A7.000 |
|
| Engine size | 1929ccm |
|
| Power | 48kw |
|
| Idle speed | 780-820rpm |
|
| Compression | 21bar |
|
| Firing order | 1-3-4-2 |
|
| Radiator cap | 0.98bar |
|
| Thermostat opens | 81-85℃ |
|
| Ventilator turn on | 87-92℃ |
|
| Battery | 60Ah |
|
| Alternator | 65 / 85A |
|
| Cylinder head tightening torque 1 | 20Nm |
|
| Cylinder head tightening torque 2 | 65Nm |
|
| Cylinder head tightening torque 3 | 90° |
|
| Cylinder head tightening torque 4 | 90° |
|
| Cylinder head tightening torque 5 | 90° |
|
| Engine oil with filter | 4.9l |
|
| Cooling system | 7.6l |
|
| Gearbox oil |
2.0l |
|
| Engine oil grade | CCMC PD2 SAE 5W-50 |
| CCMC PD2 SAE 10W-40 |
| CCMC PD2 SAE 10W-50 |
|
| Gearbox oil grade | API GL-5 SAE 75W-90 |
|
| Brake fluid | DOT 4 |
|
| Timing belt | 120000km |
|
 |
| Tire dimension (x/y R z) | 175/65 R14 |
|
| Front wheel presure | 2.3bar |
|
| Rear wheel presure | 2.2bar |
|
| Wheel bolt tightening torque (B) | 90Nm |
|
| Rear hub tightening torque (H) | 280Nm |
|
 |
| Minimal front brake disk thickness (R) | 10.2mm |
|
| Minimal front pad thickness without backing plate (P2) | 1.5mm |
|
