Service Repair Manual | |
Year | 1998-2004 |
Engine code | EYDA-EYDJ/EYDL |
Engine size | 1796ccm |
Power | 85kw |
Idle speed | 670-730rpm |
Fuel system | EEC V / SEFI |
Firing order | 1-3-4-2 |
Spark plug | Motorcraft AYFS22PP1 Denso PT16VR10 |
Electrode gap | 1.0mm |
CO | 0.5% |
CO2 | 14.5-16.0% |
HC | 100ppm |
O2 | 0.1-0.5% |
CO content at increased idle speed | 0.3% |
Increased idle speed for CO test | 2800-3100rpm |
Lambda | 0.97-1.03 |
Radiator cap | 1.2bar |
Thermostat opens | 92-99℃ |
Battery | 48-60Ah |
Alternator | 90A |
Cylinder head tightening sequence | |
Cylinder head tightening torque 1 | 20Nm |
Cylinder head tightening torque 2 | 40Nm |
Cylinder head tightening torque 3 | 90° |
Spark plug Tightening torque | 15Nm |
Engine oil with filter | 4.25l |
Cooling system | 6.6l |
Gearbox oil | |
Oil = 2.3l | |
Engine oil grade | WSS-M2C913-A SAE 5W-30 |
WSS-M2C912-A1 SAE 5W-30 | |
ACEA A3 / B3 SAE 10W-40 | |
ACEA A3 / B3 SAE 5W-40 | |
Gearbox oil grade | Ford WSD-M2C200-C |
Brake fluid | Super DOT 4 |
Timing belt | 160000km |
Tire dimension (x/y R z) | 185/65 R14 |
195/60 R15 | |
205/50 R16 | |
Front wheel presure | 2.2bar |
Rear wheel presure | 2.2bar |
Wheel bolt tightening torque (B) | 85Nm |
Front hub tightening torque (H) | 316Nm |
Rear hub tightening torque (H) | 235Nm |
Minimal front brake disk thickness (R) | 20.0mm |
Minimal rear brake disk thickness (R) | 8.0mm |
Minimal front pad thickness without backing plate (P2) | 1.5mm |
Minimal rear pad thickness without backing plate (P2) | 1.5mm |