Service Repair Manual | |
Year | 1993-1996 |
Engine code | NGA |
Engine size | 1988ccm |
Power | 100kw |
Idle speed | 830-930rpm |
Fuel system | FORD EEC IV |
Firing order | 1-3-4-2 |
Spark plug | Motorcraft AYRF22PP Bosch HR7MPP+ Denso PT16VR10 NGK PTR5A-13 |
Electrode gap | 1.3mm / 1.3mm / 1.0mm / 1.3mm |
CO | 0.5% |
CO2 | 14.5-16.0% |
HC | 100ppm |
O2 | 0.1-0.5% |
CO content at increased idle speed | 0.3% |
Increased idle speed for CO test | 2800-3100rpm |
Lambda | 0.98-1.02 |
Radiator cap | 1.2bar |
Thermostat opens | 85-89℃ |
Battery | 55Ah |
Alternator | 90A |
Spark plug Tightening torque | 15Nm |
Engine oil with filter | 4.25l |
Cooling system | 6.6l / AT = 7.1l |
Gearbox oil | 2.6l |
Automatic transmission fluid | Fluid = 3.6l / Dry refill = 7.2l |
Engine oil grade | API SG / CD SAE 5W-40 |
API SG / CD SAE 5W-50 | |
API SG / CD SAE 10W-30 | |
API SG / CD SAE 10W-40 | |
API SG /CD SAE 15W-40 | |
Gearbox oil grade | ESD-M2C-186-A |
Automatic transmission fluid type | ESP-M2C-166-H |
Brake fluid | Super DOT 4 |
Timing belt | 150000km |
Tire dimension (x/y R z) | 185/65 R14 |
195/60 R14 | |
205/55 R15 | |
Front wheel presure | 2.1bar |
Rear wheel presure | 2.1bar |
Wheel bolt tightening torque (B) | 85Nm |
Front hub tightening torque (H) | 340Nm |
Rear hub tightening torque (H) | 290Nm |
Minimal front brake disk thickness (R) | 22.2mm |
Minimal front pad thickness without backing plate (P2) | 1.5mm |
Rear drum diameter (D) | 229.6mm |
Minimal rear shoe thickness (S) | 1.0mm |