Service Repair Manual | |
Year | 1990-1994 |
Engine code | E5F-716 |
Engine size | 1171ccm |
Power | 43kw |
Idle speed | 750-850rpm |
Fuel system | Pierburg 32 |
Firing order | 1-3-4-2 |
Spark plug | Eyquem RFC 52 LS NGK BCP5ES |
Electrode gap | 0.8-0.9mm |
Radiator cap | 1.2bar |
Thermostat opens | 86-98℃ |
Battery | 40Ah |
Alternator | 60A |
Cylinder head tightening sequence | |
Cylinder head tightening torque 1 | 20Nm |
Cylinder head tightening torque 2 | 97 +/-2° |
Cylinder head tightening torque 3 | wait: 3 min., slacken bolts: 1,2, then retighten to 20Nm + 97 +/-2° |
Cylinder head tightening torque 4 | slacken bolts: 3,4,5,6, then retighten to 20Nm + 97 +/-2° |
Cylinder head tightening torque 5 | slacken bolts: 7,8,9,10, then retighten to 20Nm + 97 +/-2° |
Spark plug Tightening torque | 25-30Nm |
Engine oil with filter | 4.0l |
Cooling system | 5.2l |
Gearbox oil | 3.4l |
Engine oil grade | CCMC G5 SAE 5W-40 |
CCMC G5 SAE 5W-50 | |
CCMC G5 SAE 5W-30 | |
CCMC G5 SAE 10W-30 | |
CCMC G5 SAE 10W-40 | |
CCMC G5 SAE 10W-50 | |
Gearbox oil grade | Tranself TRX 80W |
Brake fluid | DOT 4 |
Timing belt | 120000km |
Tire dimension (x/y R z) | 145/70 R13 |
Front wheel presure | 2.4bar |
Rear wheel presure | 2.4bar |
Wheel bolt tightening torque (B) | 90Nm |
Front hub tightening torque (H) | 250Nm |
Rear hub tightening torque (H) | 160Nm |
Minimal front brake disk thickness (R) | 10.5mm |
Minimal front pad thickness (P) | 6.0mm |