Service Repair Manual |
Year | 1994-1998 |
|
Engine code | D7F-730 |
|
Engine size | 1149ccm |
|
Power | 43kw |
|
Idle speed | 690-790rpm |
|
Firing order | 1-3-4-2 |
|
Spark plug | Eyquem RFC 58 LZ2E |
|
Electrode gap | 0.9mm |
|
Lambda | 0.97-1.03 |
|
Radiator cap | 1.2bar |
|
Thermostat opens | 86-98℃ |
|
Battery | 35Ah |
|
Alternator | 70A |
|
Cylinder head tightening sequence | |
|
|
Cylinder head tightening torque 1 | 20Nm |
|
Cylinder head tightening torque 2 | 90° |
|
Cylinder head tightening torque 3 | wait: 3 min., slacken bolts: 1,2, then retighten to 20Nm + 200° |
|
Cylinder head tightening torque 4 | slacken bolts: 3,4,5,6, then retighten to 20Nm + 200° |
|
Cylinder head tightening torque 5 | slacken bolts: 7,8,9,10, then retighten to 20Nm + 200° |
|
Spark plug Tightening torque | 25-35Nm |
|
Engine oil with filter | 4.0l |
|
Cooling system | 5.0l |
|
Gearbox oil |
3.4l |
|
Engine oil grade | CCMC G5 SAE 5W-40 |
| CCMC G5 SAE 5W-50 |
| CCMC G5 SAE 5W-30 |
| CCMC G5 SAE 10W-30 |
| CCMC G5 SAE 10W-40 |
| CCMC G5 SAE 10W-50 |
|
Gearbox oil grade | Tranself TRX 80W |
|
Brake fluid | DOT 4 |
|
Timing belt | 120000km |
|
|
Tire dimension (x/y R z) | 145/70 R13 |
|
Front wheel presure | 2.4bar |
|
Rear wheel presure | 2.4bar |
|
Wheel bolt tightening torque (B) | 90Nm |
|
Front hub tightening torque (H) | 250Nm |
|
Rear hub tightening torque (H) | 160Nm |
|
|
Minimal front brake disk thickness (R) | 10.5mm |
|
Minimal front pad thickness (P) | 6.0mm |
|