Service Repair Manual |
Year | 1990-1994 |
|
Engine code | F2N-770 |
|
Engine size | 1721ccm |
|
Power | 68kw |
|
Idle speed | 750-850rpm |
|
Firing order | 1-3-4-2 |
|
Spark plug | Eyquem C 82 LS |
|
Electrode gap | 0.8mm |
|
Radiator cap | 1.6bar |
|
Thermostat opens | 89℃ |
|
Battery | 40Ah |
|
Alternator | 60A |
|
Cylinder head tightening sequence | |
|
|
Cylinder head tightening torque 1 | 30Nm |
|
Cylinder head tightening torque 2 | 80 +/-4° |
|
Cylinder head tightening torque 3 | wait: 3 min., slacken bolts: 1,2, then retighten to 25Nm + 213 +/-7° |
|
Cylinder head tightening torque 4 | slacken bolts: 3,4, then retighten to 25Nm + 213 +/-7°, slacken bolts: 5,6, then retighten to 25Nm + 213 +/-7° |
|
Cylinder head tightening torque 5 | slacken bolts: 7,8, then retighten to 25Nm + 213 +/-7°, slacken bolts: 9,10, then retighten to 25Nm + 213 +/-7° |
|
Engine oil with filter | 5.2l |
|
Cooling system | 6.4l |
|
Gearbox oil |
3.4l |
|
Engine oil grade | CCMC G5 SAE 5W-40 |
| CCMC G5 SAE 5W-50 |
| CCMC G5 SAE 5W-30 |
| CCMC G5 SAE 10W-30 |
| CCMC G5 SAE 10W-40 |
| CCMC G5 SAE 10W-50 |
|
Gearbox oil grade | Tranself TRX 80W |
|
Brake fluid | DOT 4 |
|
Timing belt | 120000km |
|
|
Tire dimension (x/y R z) | 165/60 R14 |
|
Front wheel presure | 2.3bar |
|
Rear wheel presure | 2.3bar |
|
Wheel bolt tightening torque (B) | 90Nm |
|
Front hub tightening torque (H) | 250Nm |
|
Rear hub tightening torque (H) | 160Nm |
|
|
Minimal front brake disk thickness (R) | 18.0mm |
|
Minimal rear brake disk thickness (R) | 7.0mm |
|
Minimal front pad thickness (P) | 6.0mm |
|
Minimal rear pad thickness (P) | 5.0mm |
|