Service Repair Manual | |
Year | 1996-1999 |
Engine code | E7J-624 |
Engine size | 1390ccm |
Power | 51kw |
Idle speed | 700-800rpm |
Compression | 9.5bar |
Fuel system | Siemens Fenix 3 |
Firing order | 1-3-4-2 |
Spark plug | Eyquem RFN 52 LZ Bosch FR7DC+ NGK BCP5ES |
Electrode gap | 0.9mm |
Lambda | 0.97-1.03 |
Radiator cap | 1.2bar |
Thermostat opens | 89-101℃ |
Ventilator turn on | 90℃ |
Alternator | 80 / 110A |
Cylinder head tightening sequence | |
Cylinder head tightening torque 1 | 20Nm |
Cylinder head tightening torque 2 | 97 +/-2° |
Cylinder head tightening torque 3 | wait: 3 min., slacken bolts: 1,2, then retighten to 20Nm + 97 +/-2° |
Cylinder head tightening torque 4 | slacken bolts: 3,4,5,6, then retighten to 20Nm + 97 +/-2° |
Cylinder head tightening torque 5 | slacken bolts: 7,8,9,10, then retighten to 20Nm + 97 +/-2° |
Spark plug Tightening torque | 25Nm |
Engine oil with filter | 3.0l |
Cooling system | 6.0l |
Gearbox oil | 3.4l |
Engine oil grade | CCMC G5 SAE 5W-30 |
CCMC G5 SAE 5W-40 | |
CCMC G5 SAE 5W-50 | |
CCMC G5 SAE 10W-30 | |
CCMC G5 SAE 10W-40 | |
CCMC G5 SAE 10W-50 | |
Gearbox oil grade | API GL-5 SAE 75W-80 |
Brake fluid | DOT 4 |
Timing belt | 120000km |
Tire dimension (x/y R z) | 175/70 R13 |
175/65 R14 | |
185/60 R14 | |
Front wheel presure | 2.1bar |
Rear wheel presure | 2.0bar |
Wheel bolt tightening torque (B) | 90Nm |
Front hub tightening torque (H) | 170Nm |
Rear hub tightening torque (H) | 180Nm |
Minimal front brake disk thickness (R) | 10.3mm |
Minimal front pad thickness (P) | 7.0mm |