Service Repair Manual |
| Year | 2001-2003 |
|
| Engine code | K7M-704 |
|
| Engine size | 1598ccm |
|
| Power | 54kw |
|
| Idle speed | 700-800rpm |
|
| Compression | 9.0bar |
|
| Fuel system | Siemens Fenix 5 |
|
| Firing order | 1-3-4-2 |
|
| Spark plug | Eyquem RFN 58 LZ |
|
| Electrode gap | 0.9mm |
|
| Lambda | 0.97-1.03 |
|
| Radiator cap | 1.6bar |
|
| Thermostat opens | 89-101℃ |
|
| Ventilator turn on | 90℃ |
|
| Alternator | 75 / 110A |
|
| Cylinder head tightening sequence | |
 |
|
| Cylinder head tightening torque 1 | 20Nm |
|
| Cylinder head tightening torque 2 | 100 +/-6° |
|
| Cylinder head tightening torque 3 | wait: 3 min., slacken bolts: 1,2, then retighten to 20Nm + 110 +/-6° |
|
| Cylinder head tightening torque 4 | slacken bolts: 3,4,5,6, then retighten to 20Nm + 110 +/-6° |
|
| Cylinder head tightening torque 5 | slacken bolts: 7,8,9,10, then retighten to 20Nm + 110 +/-6° |
|
| Spark plug Tightening torque | 25Nm |
|
| Engine oil with filter | 3.25l |
|
| Cooling system | 6.0l |
|
| Gearbox oil |
3.4l |
|
| Engine oil grade | CCMC G5 SAE 5W-30 |
| CCMC G5 SAE 5W-40 |
| CCMC G5 SAE 5W-50 |
| CCMC G5 SAE 10W-30 |
| CCMC G5 SAE 10W-40 |
| CCMC G5 SAE 10W-50 |
|
| Gearbox oil grade | API GL-5 SAE 75W-80 |
|
| Brake fluid | DOT 4 |
|
| Timing belt | 120000km |
|
 |
| Tire dimension (x/y R z) | 175/70 R13 |
| 175/65 R14 |
| 185/60 R14 |
|
| Front wheel presure | 2.1bar |
|
| Rear wheel presure | 2.0bar |
|
| Wheel bolt tightening torque (B) | 90Nm |
|
| Front hub tightening torque (H) | 170Nm |
|
| Rear hub tightening torque (H) | 180Nm |
|
 |
| Minimal front brake disk thickness (R) | 10.3mm |
|
| Minimal front pad thickness (P) | 7.0mm |
|
