Service Repair Manual |
| Year | 1996-1999 |
|
| Engine code | F3R-751 |
|
| Engine size | 1998ccm |
|
| Power | 84kw |
|
| Idle speed | 720-820rpm |
|
| Compression | 9.8bar |
|
| Fuel system | Siemens Fenix5 |
|
| Firing order | 1-3-4-2 |
|
| Spark plug | EYQUEM RC 52 LS |
|
| Electrode gap | 0.9mm |
|
| Lambda | 0.97-1.03 |
|
| Radiator cap | 1.6bar |
|
| Thermostat opens | 89-101℃ |
|
| Ventilator turn on | 90℃ |
|
| Alternator | 110A |
|
| Cylinder head tightening sequence | |
 |
|
| Cylinder head tightening torque 1 | 30Nm |
|
| Cylinder head tightening torque 2 | 80 +/-4° |
|
| Cylinder head tightening torque 3 | wait: 3 min., slacken bolts: 1,2, then retighten to 25Nm + 213 +/-7° |
|
| Cylinder head tightening torque 4 | slacken bolts: 3,4, then retighten to 25Nm + 213 +/-7°, slacken bolts: 5,6, then retighten to 25Nm + 213 +/-7° |
|
| Cylinder head tightening torque 5 | slacken bolts: 7,8, then retighten to 25Nm + 213 +/-7°, slacken bolts: 9,10, then retighten to 25Nm + 213 +/-7° |
|
| Spark plug Tightening torque | 25Nm |
|
| Engine oil with filter | 6.0l |
|
| Cooling system | 7.0l |
|
| Automatic transmission fluid |
5.7 / 4.0l |
|
| Engine oil grade | CCMC G5 SAE 5W-30 |
| CCMC G5 SAE 5W-40 |
| CCMC G5 SAE 5W-50 |
| CCMC G5 SAE 10W-30 |
| CCMC G5 SAE 10W-40 |
| CCMC G5 SAE 10W-50 |
|
| Automatic transmission fluid type | ATF Dexron III |
|
| Brake fluid | DOT 4 |
|
| Timing belt | 120000km |
|
 |
| Tire dimension (x/y R z) | 175/70 R13 |
| 175/65 R14 |
| 185/60 R14 |
|
| Front wheel presure | 2.2bar |
|
| Rear wheel presure | 2.0bar |
|
| Wheel bolt tightening torque (B) | 90Nm |
|
| Front hub tightening torque (H) | 170Nm |
|
| Rear hub tightening torque (H) | 180Nm |
|
 |
| Minimal front brake disk thickness (R) | 19.0mm |
|
| Minimal front pad thickness (P) | 6.0mm |
|
