Service Repair Manual |
| Year | 2003-2005 |
|
| Engine code | F9Q-800 |
|
| Engine size | 1870ccm |
|
| Power | 86kw |
|
| Idle speed | 750-850rpm |
|
| Compression | 19.0bar |
|
| Firing order | 1-3-4-2 |
|
| Radiator cap | 1.4bar |
|
| Thermostat opens | 89.99℃ |
|
| Alternator | 125 / 110A |
|
| Cylinder head tightening sequence | |
 |
|
| Cylinder head tightening torque 1 | 30Nm |
|
| Cylinder head tightening torque 2 | 100 +/-4° |
|
| Cylinder head tightening torque 3 | wait: 3 min., slacken bolts: 1,2, then retighten to 25Nm + 213 +/-7° |
|
| Cylinder head tightening torque 4 | slacken bolts: 3,4, then retighten to 25Nm + 213 +/-7°, slacken bolts: 5,6, then retighten to 25Nm + 213 +/-7° |
|
| Cylinder head tightening torque 5 | slacken bolts: 7,8, then retighten to 25Nm + 213 +/-7°, slacken bolts: 9,10, then retighten to 25Nm + 213 +/-7° |
|
| Engine oil with filter | 4.8l |
|
| Cooling system | 4.0l |
|
| Gearbox oil |
2.1l |
|
| Engine oil grade | ACEA B3 / B4 SAE 5W-40 |
|
| Brake fluid | DOT 4 |
|
| Timing belt | 120000km |
|
 |
| Tire dimension (x/y R z) | 195/65 R15 |
| 205/55 R16 |
| 205/50 R17 |
|
| Front wheel presure | 2.4bar |
|
| Rear wheel presure | 2.0bar |
|
| Wheel bolt tightening torque (B) | 110Nm |
|
| Front hub tightening torque (H) | 280Nm |
|
| Rear hub tightening torque (H) | 280Nm |
|
 |
| Minimal front brake disk thickness (R) | 21.8mm |
|
| Minimal rear brake disk thickness (R) | 6.5mm |
|
| Minimal front pad thickness (P) | 6mm |
|
| Minimal rear pad thickness (P) | 6mm |
|
