Service Repair Manual | |
| Year | 1989-1994 |
| Engine code | F8B |
| Engine size | 796ccm |
| Power | 29kw |
| Idle speed | 850-950rpm |
| Compression | 13.2bar |
| Minimum compression | 9.8bar |
| Fuel system | Mikuni |
| Firing order | 1-3-2 |
| Spark plug | NGK BPR5ES Denso W16EPR-U Bosch WR8DC+ |
| Electrode gap | 0.7-0.8mm |
| Radiator cap | 0.9bar |
| Thermostat opens | 82℃ |
| Ventilator turn on | 86-90℃ |
| Battery | 35Ah |
| Alternator | 35A |
| Cylinder head tightening torque 1 | 20-30Nm |
| Cylinder head tightening torque 2 | 30-40Nm |
| Cylinder head tightening torque 3 | 55-60Nm |
| Spark plug Tightening torque | 20-30Nm |
| Engine oil with filter | 2.5l |
| Cooling system | 3.6l |
| Gearbox oil | 2.0l |
| Automatic transmission fluid | 3.8l |
| Engine oil grade | API SF / SG SAE 10W-30 |
| API SF / SG SAE 10W-40 | |
| API SF / SG SAE 10W-50 | |
| API SF / SG SAE 15W-40 | |
| API SF / SG SAE 15W-50 | |
| Gearbox oil grade | API GL-4 SAE 75W-80 |
| API GL-4 SAE 75W-85 | |
| API GL-4 SAE 80W-90 | |
| Automatic transmission fluid type | Dexron II |
| Brake fluid | DOT 3 |
| Timing belt | 100000km |
 | |
| Tire dimension (x/y R z) | 145/70 R12 |
| Front wheel presure | 1.9bar |
| Rear wheel presure | 1.9bar |
| Wheel bolt tightening torque (B) | 50-70Nm |
| Front hub tightening torque (H) | 150-270Nm |
| Rear hub tightening torque (H) | 80-120Nm |
 | |
| Minimal front brake disk thickness (R) | 8.0mm |
| Minimal front pad thickness (P) | 6.5mm |
Suzuki Alto 0.8 GLX (796ccm) 1989-1994
Manufacturer | |
| Suzuki | |
Model | |
| Alto | |
Type | |
| 0.8 GLX | |
Year | |
| 1989-1994 | |
Engine code | |
| F8B | |
Engine size | |
| 796ccm | |
Power | |
| 29kw | |
