Service Repair Manual | |
Year | 2003-2008 |
Engine code | M13A |
Engine size | 1328ccm |
Power | 69kw |
Idle speed | 700-800rpm AC=800-900rpm |
Compression | 14.0bar |
Minimum compression | 11.0bar |
Firing order | 1-3-4-2 |
Spark plug | NGK IFR6J-11 Denso VK20 |
Electrode gap | 1.0-1.1mm |
Lambda | 0.97-1.03 |
Radiator cap | 1.1bar |
Thermostat opens | 80-84℃ |
Battery | 28 / 36 / 44Ah |
Alternator | 70 / 75A |
Cylinder head tightening sequence | |
Cylinder head tightening torque 1 | 20Nm |
Cylinder head tightening torque 2 | 40Nm |
Cylinder head tightening torque 3 | 60° |
Cylinder head tightening torque 4 | 60° |
Spark plug Tightening torque | 25Nm |
Camshaft drive | |
Engine oil with filter | 4.1l |
Cooling system | MT 5.6l AT 5.4l |
Gearbox oil | |
Oil = 2.2l | |
Automatic transmission fluid | |
Fluid = 3.3l / Dry refill = 5.6l | |
Engine oil grade | API SG / SH / SJ / SL SAE 10W-40 |
API SG / SH / SJ / SL SAE 10W-50 | |
API SG / SH / SJ / SL SAE 15W-40 | |
API SG / SH / SJ / SL SAE 15W-50 | |
API SG / SH / SJ / SL SAE 20W-50 | |
Gearbox oil grade | API GL-4 SAE 75W-90 |
API GL-4 SAE 75W-85 | |
API GL-4 SAE 80W-90 | |
Automatic transmission fluid type | ATF Dexron III |
Brake fluid | DOT 4 |
Tire dimension (x/y R z) | 165/60 R14 |
Front wheel presure | 2.1bar |
Rear wheel presure | 2.5bar |
Wheel bolt tightening torque (B) | 95Nm |
Front hub tightening torque (H) | 175Nm |
Rear hub tightening torque (H) | 175Nm |
Minimal front brake disk thickness (R) | 10.0mm |
Minimal front pad thickness (P) | 8.2mm |
Rear drum diameter (D) | 180mm |
Minimal rear shoe thickness (S) | 1.0mm |